Summary: Hemerythrin HHE cation binding domain
Pfam includes annotations and additional family information from a range of different sources. These sources can be accessed via the tabs below.
This is the Wikipedia entry entitled "Hemerythrin". More...
The Wikipedia text that you see displayed here is a download from Wikipedia. This means that the information we display is a copy of the information from the Wikipedia database. The button next to the article title ("Edit Wikipedia article") takes you to the edit page for the article directly within Wikipedia. You should be aware you are not editing our local copy of this information. Any changes that you make to the Wikipedia article will not be displayed here until we next download the article from Wikipedia. We currently download new content on a nightly basis.
Does Pfam agree with the content of the Wikipedia entry ?
Pfam has chosen to link families to Wikipedia articles. In some case we have created or edited these articles but in many other cases we have not made any direct contribution to the content of the article. The Wikipedia community does monitor edits to try to ensure that (a) the quality of article annotation increases, and (b) vandalism is very quickly dealt with. However, we would like to emphasise that Pfam does not curate the Wikipedia entries and we cannot guarantee the accuracy of the information on the Wikipedia page.
Editing Wikipedia articles
Before you edit for the first time
Wikipedia is a free, online encyclopedia. Although anyone can edit or contribute to an article, Wikipedia has some strong editing guidelines and policies, which promote the Wikipedia standard of style and etiquette. Your edits and contributions are more likely to be accepted (and remain) if they are in accordance with this policy.
You should take a few minutes to view the following pages:
How your contribution will be recorded
Anyone can edit a Wikipedia entry. You can do this either as a new user or you can register with Wikipedia and log on. When you click on the "Edit Wikipedia article" button, your browser will direct you to the edit page for this entry in Wikipedia. If you are a registered user and currently logged in, your changes will be recorded under your Wikipedia user name. However, if you are not a registered user or are not logged on, your changes will be logged under your computer's IP address. This has two main implications. Firstly, as a registered Wikipedia user your edits are more likely seen as valuable contribution (although all edits are open to community scrutiny regardless). Secondly, if you edit under an IP address you may be sharing this IP address with other users. If your IP address has previously been blocked (due to being flagged as a source of 'vandalism') your edits will also be blocked. You can find more information on this and creating a user account at Wikipedia.
If you have problems editing a particular page, contact us at email@example.com and we will try to help.
The community annotation is a new facility of the Pfam web site. If you have problems editing or experience problems with these pages please contact us.
Hemerythrin Edit Wikipedia article
Hemerythrin (also spelled haemerythrin; from Greek words Î±Î¯Î¼Î± = blood and ÎµÏÏ Î¸ÏÏÏ = red) is an oligomeric protein responsible for oxygen (O2) transport in the marine invertebrate phyla of sipunculids, priapulids, brachiopods, and in a single annelid worm, magelona. Recently, hemerythrin was discovered in methanotrophic bacterium Methylococcus capsulatus. Myohemerythrin is a monomeric O2-binding protein found in the muscles of marine invertebrates. Hemerythrin and myohemerythrin are essentially colorless when deoxygenated, but turn a violet-pink in the oxygenated state.
Hemerythrin does not, as the name might suggest, contain a heme. The names of the blood oxygen transporters hemoglobin, hemocyanin, hemerythrin, do not refer to the heme group (only found in globins), instead these names are derived from the Greek word for blood.
 O2 binding mechanism
The mechanism of dioxygen binding is unusual. Most O2 carriers operate via formation of dioxygen complexes, but hemerythrin holds the O2 as a hydroperoxide. The site that binds O2 consists of a pair of iron centres. The iron atoms are bound to the protein through the carboxylate side chains of a glutamate and aspartates as well as through five histidine residues. Hemerythrin and myohemerythrin are often described according to oxidation and ligation states of the iron centre:
|Fe3+âOHâFe3+â (any other ligand)||met (oxidized)|
Deoxyhemerythrin contains two high-spin ferrous ions bridged by hydroxyl group (A). One iron is hexacoordinate and another is pentacoordinate. A hydroxyl group serves as a bridging ligand but also functions as a proton donor to the O2 substrate. This proton-transfer result in the formation of a single oxygen atom (Î¼-oxo) bridge in oxy- and methemerythrin. O2 binds to the pentacoordinate Fe2+ centre at the vacant coordination site (B). Then electrons are transferred from the ferrous ions to generate the binuclear ferric (Fe3+,Fe3+) centre with bound peroxide (C).
 Quaternary structure and cooperativity
Hemerythrin typically exists as a homooctamer or heterooctamer composed of Î±- and Î²-type subunits of 13-14 kDa each, although some species have dimeric, trimeric and tetrameric hemerythrins. Each subunit has a four-Î±-helix fold binding a binuclear iron centre. Because of its size hemerythrin is usually found in cells or "corpuscles" in the blood rather than free floating.
Unlike hemoglobin, most hemerythrins lack cooperative binding to oxygen, making it roughly 1/4 as efficient as hemoglobin. In some brachiopods though, hemerythrin shows cooperative binding of O2. Cooperative binding is achieved by interactions between subunits: the oxygenation of one subunit increases the affinity of a second unit for oxygen.
Hemerythrin affinity for carbon monoxide (CO) is actually lower than its affinity for O2, unlike hemoglobin which has a very high affinity for CO. Hemerythrin's low affinity for CO poisoning reflects the role of hydrogen-bonding in the binding binding O2, a pathway mode that is incompatible with CO complexes which usually do not engage in hydrogen bonding.
 Hemerythrin/HHE cation-binding domain
|Hemerythrin HHE cation binding domain|
crystal structures of an antibody to a peptide and its complex with peptide antigen at 2.8 angstroms
The hemerythrin/HHE cation-binding domain occurs as a duplicated domain in hemerythrins, myohemerythrins and related proteins. This domain binds iron in hemerythrin, but can bind other metals in related proteins, such as cadmium in the Nereis diversicolor hemerythrin. It is also found in the NorA protein from Cupriavidus necator, this protein is a regulator of response to nitric oxide, which suggests a different set-up for its metal ligands. A protein from Cryptococcus neoformans (Filobasidiella neoformans) that contains haemerythrin/HHE cation-binding domains is also involved in nitric oxide response. A Staphylococcus aureus protein containing this domain, iron-sulfur cluster repair protein ScdA, has been noted to be important when the organism switches to living in environments with low oxygen concentrations; perhaps this protein acts as an oxygen store or scavenger.
- D. M. Kurtz, Jr. "Dioxygen-binding Proteins" in Comprehensive Coordination Chemistry II 2003, Volume 8, Pages 229-260. doi:10.1016/B0-08-043748-6/08171-8
- Friesner, R. A., M.-H. Baik, B. F. Gherman, V. Guallar, M. Wirstam, R. B. Murphy, and S. J. Lippard, 2003, How iron-containing proteins control dioxygen chemistry: a detailed atomic level description via accurate quantum chemical and mixed quantum mechanics/molecular mechanics calculations: Coord. Chem. Rev., v. 238-239, p. 267-290.
- Chow ED, Liu OW, O'Brien S, Madhani HD (September 2007). "Exploration of whole-genome responses of the human AIDS-associated yeast pathogen Cryptococcus neoformans var grubii: nitric oxide stress and body temperature". Curr. Genet. 52 (3â4): 137â48. doi:10.1007/s00294-007-0147-9. PMID 17661046.
- Overton TW, Justino MC, Li Y, Baptista JM, Melo AM, Cole JA et al. (2008). "Widespread Distribution in Pathogenic Bacteria of Di-Iron Proteins That Repair Oxidative and Nitrosative Damage to Iron-Sulfur Centers". J Bacteriol 190 (6): 2004â13. doi:10.1128/JB.01733-07. PMC 2258886. PMID 18203837.
 Further reading
- Karlsen, O.A., Ramsevik, L., Bruseth, L.J., Larsen, Ã., Brenner, A., Berven, F.S., Jensen, H.B. and Lillehaug, J.R. (2005). "Characterization of a prokaryotic haemerythrin from the methanotrophic bacterium Methylococcus capsulatus (Bath)". FEBS J. 272 (10): 2428â2440. doi:10.1111/j.1742-4658.2005.04663.x. PMID 15885093.
- Stenkamp, R.E. (1994). "Dioxygen and hemerythrin". Chem. Rev. 94 (3): 715â726. doi:10.1021/cr00027a008.
- 1HMD - PDB structure of deoxyhemerythrin Themiste dyscrita (sipunculid worm)
- 1HMO - PDB structure of oxyhemerythrin from Themiste dyscrita
- 2MHR - PDB structure of azido-met myohemerythrin from Themiste zostericola (sipunculid worm)
- IPR002063 - InterPro entry for hemerythrin
This tab holds the annotation information that is stored in the Pfam database. As we move to using Wikipedia as our main source of annotation, the contents of this tab will be gradually replaced by the Wikipedia tab.
Hemerythrin HHE cation binding domain Provide feedback
Iteration of the HHE family () found it to be related to Hemerythrin. It also demonstrated that what has been described as a single domain () in fact consists of two cation binding domains. Members of this family occur all across nature and are involved in a variety of processes. For instance, in Nereis diversicolor P80255 binds Cadmium so as to protect the organism from toxicity (). However Hemerythrin is classically described as Oxygen-binding through two attached Fe2+ ions. And the bacterial Q7WX96 is a regulator of response to NO, which suggests yet another set-up for its metal ligands (). In Staphylococcus aureus P72360 has been noted to be important when the organism switches to living in environments with low oxygen concentrations (); perhaps this protein acts as an oxygen store or scavenger.
Stenkamp RE, Sieker LC, Jensen LH, McQueen JE Jr; , Biochemistry 1978;17:2499-2504.: Structure of methemerythrin at 2.8-Angstrom resolution: computer graphics fit of an averaged electron density map. PUBMED:678527 EPMC:678527
Martins LJ, Hill CP, Ellis WR Jr; , Biochemistry 1997;36:7044-7049.: Structures of wild-type chloromet and L103N hydroxomet Themiste zostericola myohemerythrins at 1.8 A resolution. PUBMED:9188702 EPMC:9188702
Throup JP, Zappacosta F, Lunsford RD, Annan RS, Carr SA, Lonsdale JT, Bryant AP, McDevitt D, Rosenberg M, Burnham MK; , Biochemistry 2001;40:10392-10401.: The srhSR gene pair from Staphylococcus aureus: genomic and proteomic approaches to the identification and characterization of gene function. PUBMED:11513618 EPMC:11513618
External database links
This tab holds annotation information from the InterPro database.
InterPro entry IPR012312
This entry represents a haemerythrin/HHE cation-binding domain that occurs as a duplicated domain [PUBMED:12625841] in haemerythrins, myohemerythrins and related proteins. This domain binds iron in haemerythrin, but can bind other metals in related proteins, such as cadmium in a Nereis diversicolor protein (SWISSPROT) [PUBMED:12743530]. A bacterial protein, SWISSPROT, is a regulator of response to NO, which suggests a different set-up for its metal ligands. A protein from Cryptococcus neoformans (Filobasidiella neoformans) that contains haemerythrin/HHE cation-binding domains is also involved in NO response [PUBMED:17661046]. A Staphylococcus aureus protein (SWISSPROT) has been noted to be important when the organism switches to living in environments with low oxygen concentrations [PUBMED:11513618]; perhaps this protein acts as an oxygen store or scavenger.
Below is a listing of the unique domain organisations or architectures in which this domain is found. More...
The graphic that is shown by default represents the longest sequence with a given architecture. Each row contains the following information:
- the number of sequences which exhibit this architecture
a textual description of the architecture, e.g. Gla, EGF x 2, Trypsin.
This example describes an architecture with one
Gladomain, followed by two consecutive
EGFdomains, and finally a single
- a link to the page in the Pfam site showing information about the sequence that the graphic describes
- the UniProt description of the protein sequence
- the number of residues in the sequence
- the Pfam graphic itself.
Note that you can see the family page for a particular domain by clicking on the graphic. You can also choose to see all sequences which have a given architecture by clicking on the Show link in each row.
Finally, because some families can be found in a very large number of architectures, we load only the first fifty architectures by default. If you want to see more architectures, click the button at the bottom of the page to load the next set.
Loading domain graphics...
We store a range of different sequence alignments for families. As well as the seed alignment from which the family is built, we provide the full alignment, generated by searching the sequence database using the family HMM. We also generate alignments using four representative proteomes (RP) sets, the NCBI sequence database, and our metagenomics sequence database. More...
There are various ways to view or download the sequence alignments that we store. We provide several sequence viewers and a plain-text Stockholm-format file for download.
We make a range of alignments for each Pfam-A family:
- the curated alignment from which the HMM for the family is built
- the alignment generated by searching the sequence database using the HMM
- Representative Proteomes (RPs) at 15%, 35%, 55% and 75% co-membership thresholds
- alignment generated by searching the NCBI sequence database using the family HMM
- alignment generated by searching the metagenomics sequence database using the family HMM
You can see the alignments as HTML or in three different sequence viewers:
- a Java applet developed at the University of Dundee. You will need Java installed before running jalview
- an HTML page showing the whole alignment.Please note: full Pfam alignments can be very large. These HTML views are extremely large and often cause problems for browsers. Please use either jalview or the Pfam viewer if you have trouble viewing the HTML version
- an HTML-based representation of the alignment, coloured according to the posterior-probability (PP) values from the HMM. As for the standard HTML view, heatmap alignments can also be very large and slow to render.
- Pfam viewer
- an HTML-based viewer that uses DAS to retrieve alignment fragments on request
You can download (or view in your browser) a text representation of a Pfam alignment in various formats:
You can also change the order in which sequences are listed in the alignment, change how insertions are represented, alter the characters that are used to represent gaps in sequences and, finally, choose whether to download the alignment or to view it in your browser directly.
You may find that large alignments cause problems for the viewers and the reformatting tool, so we also provide all alignments in Stockholm format. You can download either the plain text alignment, or a gzipped version of it.
We make a range of alignments for each Pfam-A family. You can see a description of each above. You can view these alignments in various ways but please note that some types of alignment are never generated while others may not be available for all families, most commonly because the alignments are too large to handle.
1Cannot generate PP/Heatmap alignments for seeds; no PP data available
Key: available, not generated, — not available.
Format an alignment
We make all of our alignments available in Stockholm format. You can download them here as raw, plain text files or as gzip-compressed files.
You can also download a FASTA format file containing the full-length sequences for all sequences in the full alignment.
MyHits provides a collection of tools to handle multiple sequence alignments. For example, one can refine a seed alignment (sequence addition or removal, re-alignment or manual edition) and then search databases for remote homologs using HMMER3.
HMM logos is one way of visualising profile HMMs. Logos provide a quick overview of the properties of an HMM in a graphical form. You can see a more detailed description of HMM logos and find out how you can interpret them here. More...
If you find these logos useful in your own work, please consider citing the following article:
This page displays the phylogenetic tree for this family's seed alignment. We use FastTree to calculate neighbour join trees with a local bootstrap based on 100 resamples (shown next to the tree nodes). FastTree calculates approximately-maximum-likelihood phylogenetic trees from our seed alignment.
Note: You can also download the data file for the tree.
Curation and family details
This section shows the detailed information about the Pfam family. You can see the definitions of many of the terms in this section in the glossary and a fuller explanation of the scoring system that we use in the scores section of the help pages.
|Seed source:||Yeats C|
|Author:||Bateman A, Yeats C|
|Number in seed:||189|
|Number in full:||6352|
|Average length of the domain:||127.90 aa|
|Average identity of full alignment:||17 %|
|Average coverage of the sequence by the domain:||51.44 %|
|HMM build commands:||
build method: hmmbuild -o /dev/null HMM SEED
search method: hmmsearch -Z 23193494 -E 1000 --cpu 4 HMM pfamseq
|Family (HMM) version:||18|
|Download:||download the raw HMM for this family|
Weight segments by...
Change the size of the sunburst
selected sequences to HMM
a FASTA-format file
- 0 sequences
- 0 species
This visualisation provides a simple graphical representation of the distribution of this family across species. You can find the original interactive tree in the More....
This chart is a modified "sunburst" visualisation of the species tree for this family. It shows each node in the tree as a separate arc, arranged radially with the superkingdoms at the centre and the species arrayed around the outermost ring.
How the sunburst is generated
The tree is built by considering the taxonomic lineage of each sequence that has a match to this family. For each node in the resulting tree, we draw an arc in the sunburst. The radius of the arc, its distance from the root node at the centre of the sunburst, shows the taxonomic level ("superkingdom", "kingdom", etc). The length of the arc represents either the number of sequences represented at a given level, or the number of species that are found beneath the node in the tree. The weighting scheme can be changed using the sunburst controls.
In order to reduce the complexity of the representation, we reduce the number of taxonomic levels that we show. We consider only the following eight major taxonomic levels:
Colouring and labels
Segments of the tree are coloured approximately according to their superkingdom. For example, archeal branches are coloured with shades of orange, eukaryotes in shades of purple, etc. The colour assignments are shown under the sunburst controls. Where space allows, the name of the taxonomic level will be written on the arc itself.
As you move your mouse across the sunburst, the current node will be highlighted. In the top section of the controls panel we show a summary of the lineage of the currently highlighed node. If you pause over an arc, a tooltip will be shown, giving the name of the taxonomic level in the title and a summary of the number of sequences and species below that node in the tree.
Anomalies in the taxonomy tree
There are some situations that the sunburst tree cannot easily handle and for which we have work-arounds in place.
Missing taxonomic levels
Some species in the taxonomic tree may not have one or more of the main eight levels that we display. For example, Bos taurus is not assigned an order in the NCBI taxonomic tree. In such cases we mark the omitted level with, for example, "No order", in both the tooltip and the lineage summary.
Unmapped species names
The tree is built by looking at each sequence in the full alignment for the family. We take the name of the species given by UniProt and try to map that to the full taxonomic tree from NCBI. In some cases, the name chosen by UniProt does not map to any node in the NCBI tree, perhaps because the chosen name is listed as a synonym or a misspelling in the NCBI taxonomy.
So that these nodes are not simply omitted from the sunburst tree, we group them together in a separate branch (or segment of the sunburst tree). Since we cannot determine the lineage for these unmapped species, we show all levels between the superkingdom and the species as "uncategorised".
Since we reduce the species tree to only the eight main taxonomic levels, sequences that are mapped to the sub-species level in the tree would not normally be shown. Rather than leave out these species, we map them instead to their parent species. So, for example, for sequences belonging to one of the Vibrio cholerae sub-species in the NCBI taxonomy, we show them instead as belonging to the species Vibrio cholerae.
Too many species/sequences
For large species trees, you may see blank regions in the outer layers of the sunburst. These occur when there are large numbers of arcs to be drawn in a small space. If an arc is less than approximately one pixel wide, it will not be drawn and the space will be left blank. You may still be able to get some information about the species in that region by moving your mouse across the area, but since each arc will be very small, it will be difficult to accurately locate a particular species.
The tree shows the occurrence of this domain across different species. More...
We show the species tree in one of two ways. For smaller trees we try to show an interactive representation, which allows you to select specific nodes in the tree and view them as an alignment or as a set of Pfam domain graphics.
Unfortunately we have found that there are problems viewing the interactive tree when the it becomes larger than a certain limit. Furthermore, we have found that Internet Explorer can become unresponsive when viewing some trees, regardless of their size. We therefore show a text representation of the species tree when the size is above a certain limit or if you are using Internet Explorer to view the site.
If you are using IE you can still load the interactive tree by clicking the "Generate interactive tree" button, but please be aware of the potential problems that the interactive species tree can cause.
For all of the domain matches in a full alignment, we count the number that are found on all sequences in the alignment. This total is shown in the purple box.
We also count the number of unique sequences on which each domain is found, which is shown in green. Note that a domain may appear multiple times on the same sequence, leading to the difference between these two numbers.
Finally, we group sequences from the same organism according to the NCBI code that is assigned by UniProt, allowing us to count the number of distinct sequences on which the domain is found. This value is shown in the pink boxes.
We use the NCBI species tree to group organisms according to their taxonomy and this forms the structure of the displayed tree. Note that in some cases the trees are too large (have too many nodes) to allow us to build an interactive tree, but in most cases you can still view the tree in a plain text, non-interactive representation. Those species which are represented in the seed alignment for this domain are highlighted.
You can use the tree controls to manipulate how the interactive tree is displayed:
- show/hide the summary boxes
- highlight species that are represented in the seed alignment
- expand/collapse the tree or expand it to a given depth
- select a sub-tree or a set of species within the tree and view them graphically or as an alignment
- save a plain text representation of the tree
Please note: for large trees this can take some time. While the tree is loading, you can safely switch away from this tab but if you browse away from the family page entirely, the tree will not be loaded.
There is 1 interaction for this family. More...
We determine these interactions using iPfam, which considers the interactions between residues in three-dimensional protein structures and maps those interactions back to Pfam families. You can find more information about the iPfam algorithm in the journal article that accompanies the website.
For those sequences which have a structure in the Protein DataBank, we use the mapping between UniProt, PDB and Pfam coordinate systems from the PDBe group, to allow us to map Pfam domains onto UniProt sequences and three-dimensional protein structures. The table below shows the structures on which the Hemerythrin domain has been found. There are 37 instances of this domain found in the PDB. Note that there may be multiple copies of the domain in a single PDB structure, since many structures contain multiple copies of the same protein seqence.
Loading structure mapping...